Dry cargo vetting

RightShip inspection preparation: a practical guide for bulk carrier officers

A RightShip inspection is won or lost in the holds and on the hatch covers long before the documentation review begins. Charterers read the outcome as a proxy for how the ship is run. This guide covers where inspectors focus and how to build readiness into the normal running of the ship.

Where RightShip inspectors concentrate

Dry cargo vetting is unforgiving about the cargo containment system. Hatch cover integrity, hold condition, bilge systems and ballast management carry real weight, because failures there turn into cargo claims and pollution events. Expect close attention to:

  • Hatch covers: rubber packing condition, compression bars, cleats, drain channels and an honest weathertightness test record — hose or ultrasonic.
  • Hold condition: coating breakdown, previous cargo residue, structural deformation and any doubling plate repairs.
  • Bilges and ballast: sounding pipe condition, bilge well cleanliness, ballast water record keeping and exchange or treatment compliance.
  • Documentation: loading computer certification, cargo securing manual, stability booklets and the paper trail that proves maintenance actually happened.

Maintenance records are the cargo

Inspectors treat the planned maintenance system as a window into the ship’s culture. A hatch cover with fresh grease but no recorded inspection interval raises more questions than a worn seal with a documented replacement order. Keep the records honest and current; never backfill entries the week before a vetting — experienced inspectors spot the pattern immediately.

Crew familiarity

Like every modern vetting regime, RightShip inspections test people as well as steel. Ratings may be asked about hatch cover operation, ballast valve line-ups, enclosed space entry and what they would do if a hold alarm sounded during loading. Officers should expect questions on cargo planning, shear force and bending moment limits, and grain stability where relevant.

Short, regular questioning by the ship’s own officers is the proven preparation. It surfaces gaps while there is still time to close them, and it teaches the crew that being asked is normal.

A week-by-week outline

  • Eight weeks out: full self-assessment against the inspection question areas, with photographs of every hold and hatch cover.
  • Six weeks out: order spares for anything found; begin ultrasonic or hose testing and log the results.
  • Four weeks out: documentation audit — certificates, manuals, records — with a single folio assembled for inspection day.
  • Two weeks out: crew familiarisation sessions and at least one full mock inspection walk, holds included.
  • Final days: clean as if loading a grain cargo, brief the gangway watch, and prepare answers with evidence attached.

After the inspection

Whatever the findings, respond fast and with evidence. A corrective action backed by a dated photograph and a closed maintenance job reads very differently from a promise. Ships that treat observations as free consulting — and close them visibly — find the next inspection starts from a position of trust.

Questions seafarers ask

Which vessel types are covered by RightShip RISQ 3.2?

RightShip’s Inspection Ship Questionnaire (RISQ 3.2) covers dry bulk carriers, general cargo vessels, container ships and roll-on/roll-off (Ro-Ro) vessels across 17 sections. In SeaReady, livestock carriers also receive RISQ 3.2 preparation together with the dedicated livestock add-on (Section 8L covering ventilation, fodder/water reserves and pen arrangements).

What do RightShip inspectors scrutinise most closely on a bulk carrier?

Inspectors focus heavily on hatch cover weathertightness (rubber packing, compression bars, cleats, drain channels and ultrasonic or hose test records), cargo hold coatings and structural frames, bilge and ballast well testing, approved loading computer and grain stability records, enclosed space entry controls and planned maintenance integrity.

How long does the operator have to submit root-cause and corrective actions after a RightShip inspection?

Following the closing meeting, the operator generally has 15 calendar days to upload root-cause analysis (RCA), corrective actions and dated photographic or maintenance evidence in the RightShip platform so charterers can review the closed findings.

Put this into practice aboard

SeaReady turns this preparation into a living checklist on the bridge — offline, on your device, ready when the inspector is.

Create your free account

The whole toolkit is free, no card. Optional AI features from $39.99/month + 5% sales tax — with a 3-day free trial.